Rinse Pimp Refill Instructions

Resin exhaustion is indicated by the colour change of the resin. The clear part of the Rinse Pimp will change from blue to orange.

Step 1

Remove the top tap adapter complete with internal screen, and exchange for the alternative tap adapter provided that does not contain a screen.

Step 2

Connect a hose via the adaptor on the bottom of the Rinse Pimp, then connect the short piece of hose provided to the alternative adapter on the top of the Rinse Pimp and place the outlet of the hose into a bucket.

Step 3

Turn on the tap slowly and backwash the resin into the bucket (water will be a straw colour) wait for the water to run clear and then turn off the tap.

Step 4

Remove the hose from the top of the Rinse Pimp. Place the bucket underneath the Rinse Pimp then remove the hose from the bottom of the Rinse Pimp draining the water into the bucket.

Step 5

Remove the top tap adapter and place the funnel provided into the top of the Rinse Pimp. Pour the blue coloured resin into the funnel, and add a little water to aid the resin flow, and allow water to drain. Now pour in the remaining brown resin into the unit.  If the resin gets stuck in the funnel pour a small amount of water into the funnel to wash it through making sure the bucket is underneath to catch the water.

Rinse Pimp

Rinse Pimp Exhausted

Colour Change Resin

Colour Change Resin Exhausted

For a pdf printable version of the refill instructions click here to visit our download page

For Rinse Pimp wall mounting instructions click here

For Rinse Pimp instructions for use click here