Rinse Pimp 20 Instructions for use

Rinse Pimp 20 connection diagram

Step 3

Connect the Rinse Pimp 20 as shown in the diagram above. Keep the length of the hose from the Rinse Pimp 20 to the vehicle as short as possible to avoid wastage. Rinse the vehicle for a second time using the filtered water with a spray gun set to a fine mist.

Step 4.

Leave the vehicle to dry naturally to reveal the effortless spot-free shine.

For best results and to extend the resin life we recommend the following:

• Do not use in conjunction with a pressure washer

• Keep flow rate to a minimum (we recommend about 2 litres per minute)

• Use water from the Rinse Pimp 20 sparingly, only use enough water to re-wet all surfaces

• Mount vertically and feed water from the top each time so that the water travels through the resin in the same direction.

• When a refill is required it is indicated by a TDS meter reading in excess of 20ppm. The TDS meter is shown below and is supplied with the Rinse Pimp 20. To use the TDS meter you simply dip the TDS meter into a sample of the water and press the button. Detailed instructions are included with the TDS meter, please read these instructions before use.

TDS Meter

For Rinse Pimp 20 refill instructions click here

If you have a hose pipe ban in your area click here for our hose pipe ban survival guide!

For customer testimonials for the Rinse Pimp please click here